Mini Wind Turbine Charge is designed for charging rechargeable batteries. You can modify the parameters (blades and vane) of this turbine to maximize the output of the turbine at the wind environment it is intended to operate.
Mini Wind Turbine Charge can generate electricity at low wind speed. It operates on a small 3-phase AC alternator. The AC electricity is rectified to DC electricity for output.
Mini Wind Turbine Charge comes with a set of 6 blades and 1 vane. They are cut from flexible plastic (Poly-Propylene) sheets. You can design your own blades and vanes with easily available plastic or paper card sheets. Scissors and Punch are the standard stationery needed to work with your imagination to create your own blades and vanes. You can modify the number, size and shape of the blades to maximize the output of the turbine. You may also modify the size, shape and color of the vanes to make fun with it.
You may connect several Mini Wind Turbine Charge together to form a Wind Farm. You can configure the wind turbines to increase the output voltage or current by connecting them in Series or in Parallel.
You may use our LED Voltmeter (not included in the package) to monitor the output of the wind turbine to improve the charging efficiency. The higher the voltage, the higher is the output power.
Specifications
| Power Capacity (@ Rotor speed of 2000 RPM) |
1 Watt |
| Direct Output Voltage (@ Rotor speed of 2000 RPM) |
DC 10V |
| Direct Output Current (@ Rotor speed of 2000 RPM) |
DC 100 mA |
| Direct Output Voltage (@ Rotor speed of 1000 RPM) |
DC 5V |
| Direct Output Current (@ Rotor speed of 1000 RPM) |
DC 50 mA |
| Start-up (Rotor about to turn) Wind Speed |
3.5 mph (or 1.6 m/s) |
| Cut-In (Generator Starts to generate electricity) Wind Speed |
5 mph (or 2.2 m/s) |
